Custom Retro Pastel Sublimation Transfer

This is a ready to press sublimation transfer. 

WHAT YOU NEED:
You must have a heat press in order to use this print.
You garment needs to be a minimum of 50% polyester, but the more polyester the better. 
Parchment paper. It is recommended that you put a piece between your shirt before pressing as well as on top of your design before pressing to stop any ink transfer. 
Spray bottle filled with peroxide-- this is not needed but is useful if there is any scorching. 

HOW TO PRESS:
All heat presses are different so you will need to learn your press to decide what time and temp works best for you. I recommend pressing at 380 degrees for 55 seconds. If you have scorch marks on your shirt after pressing you can spray it with peroxide, let heat press hover over the shirt for about 10-15 seconds (DO NOT PRESS IT ON THE SHIRT), lift the press up and the scorch marks should go away. If you have scorch marks it may mean that your press is too hot. I do not take any responsibility for damage that may be done to your garment due to press settings. 

GOOD BRANDS TO USE:
Gildan Softstyle
Bella Canvas Triblend
Sublivie
Bella Viscose Tees
Tultex Poly-Rich

SIZE
All measurements are done by the longest side of the design.